ROD SEALS SUPPLIER: ARYAN RUBBER PRODUCTS is a leading supplier of high quality ROD SEALS. ROD SEALS are used in hydraulic cylinders for fluid sealing. ROD SEALS are external to the cylinder head and seal against the cylinder’s rod, preventing leakage of fluid from within the cylinder to the outside. ROD SEALS are provided as per the set industry norms and guidelines. ROD SEALS are hydraulic seals ideally suited for heavy-duty mobile and stationary service where leakage must be held to an absolute minimum. Its geometry is highly resistant to side loading and is insensitive to pressure spikes and reduces or eliminates leakage under severe operating conditions. ROD SEAL is an asymmetric seal offering superlative dry rod sealing for light and medium duty applications. It has become an industry standard seal worldwide owing to its twin lip profile and consistent performance. MATERIAL: The thermoplastic polyurethane material used for U-Cups has a high abrasion resistance, low compression set and exhibits a high resistance to gap extrusion. It is particularly resistant to tearing resulting from bending and tensile stresses and thus is very easy to install. FEATURES: - ROD SEALS are recommended for pressures up to 2200 PSI (150 bar) and temperature range from -30 deg C to +105 deg C. -Twin Lip design offering: Lower friction, improved sealing, Primary lip protection, increased seal stability. - ROD SEAL is an extremely flexible seal making installation very easy.